HDMI compliant emulator with USB and wall power
Additional places to buy:

Buy on Amazon
Buy on eBay

19 in stock



The ConnectPRO DDC EDID Ghosting Emulator is designed to solve the problem that computers can sometimes lose the Extended Display Identification Data (EDID). The EDID data is vital for the video extension; it is a data structure provided by a computer display to describe its characteristics to a graphics card. However, when you switch or disconnect and then reconnect the displays such as the monitor, you may lose EDID communication, and the user’s computer then fails to display the image properly if at all.

Now, such is no longer the case if you use ConnectPRO’s HDMI DDC EDID Emulator module. The ConnectPRO DDC EDID Emulator allows the user to have best video image setting all the time. Through an easy programmed process, the display’s DDC EDID is memorized in the DDC module, thus preventing our customers from blank screens and boot problems as well as resolving the issue of display resolution and color due to a lack of DDC EDID information.

Features and Benefits

  • Clones the EDID from your display to place closer to the source
  • Metal casing, simple to set up
  • Allows you to send an HDMI signal through many devices in a chain
  • Dip switches let you choose a generic EDID
  • Includes 1 ft. HDMI cable and power cable

UPC Code: 641458328201

Technical Specifications



Power supply

If required, USB or 5V DC adaptor

Power LED / Default EDID


Clone EDID

Push button switch

Clone indication

Change to Orange color


Up to 1920 x 1200@60 Hz

Connectors HDMI Female x 2

Video Input Definition


Digital Signal (HDMI)

Video level

0.700, 0.000 ( 0.700 Vp-p )

Sync. support


Establishing and Standard Timing

Establishing timing I

0 to 60 degrees C

Establishing timing Ii

-30 to 70 degrees C

Standard timing identification

0~80% RH, NC



22 mm ( 0.87 inch )


45 mm ( 1.77 inch )


70 mm ( 2.76 inch )


70 g ( 0.15 lb )



Supported Resolutions on Default Table

The preferred method is for the customer to clone the specific monitor that is to be used, but when that is not an option the customer can use the standard table built into the Ghost Emulator (the Green light setting).

Standard Table

720 x 400p at 70Hz – IBM VGA
640 x 480p at 60Hz – IBM VGA
640 x 480p at 67Hz – Apple Mac II
640 x 480p at 72Hz – VESA
640 x 480p at 75Hz – VESA
800 x 600p at 56Hz – VESA
800 x 600p at 60Hz – VESA
800 x 600p at 72Hz – VESA
800 x 600p at 75Hz – VESA
832 x 624p at 75Hz – Apple Mac II
1024 x 768p at 60Hz – VESA
1024 x 768p at 70Hz – VESA
1024 x 768p at 75Hz – VESA
1280 x 1024p at 75Hz – VESA
1152 x 870p at 75Hz – Apple Mac II
1920 x 1080p at 60Hz – VESA STD
1680 x 1050p at 60Hz – VESA STD
1600 x 1200p at 60Hz – VESA STD
1440 x 900p at 60Hz – VESA STD
1400 x 1050p at 60Hz – VESA STD
1280 x 1024p at 60Hz – VESA STD
1280 x 960p at 60Hz – VESA STD
1152 x 864p at 75Hz – VESA STD
Using with a KVM Switch
EDID_diagram_switch (2)

** ConnectPRO’s current selection of UR and PR KVM switches has built-in All-time Full DDC support, making a ghosting emulator unneccessary.

Using with a KVM or Video Extender
EDID_diagram_extender (2)

** ConnectPRO’s EOC-VA1 audio/video extender over Cat5 has built-inAll-time Full DDC support, making a ghosting emulator unneccessary.

Additional information

Weight 2 lbs
Dimensions 14 × 10 × 3 in
Display Connection

Power Adapter Included

USB Cable Included

Frequently Asked Questions


    • Does the display I want to use have to be cloned?

      • No. There is an alternate mode, represented by a green LED light, which feeds a profile for a standard display, with some common resolutions built-in.


  • Will the Emulator ever need to be recloned? Does it ever lose the cloned image? Does it have to be recloned after being without power for a certain amount of time?

    • The Emulator will keep the cloned image permanently until a new monitor is cloned, which effectively overwrites the initial cloned image.